Hammer crusher for grain and corn cobs (without motor)

Visit our store and browse our full range of home improvement products:
https://

The grain crusher is designed for preparing feed by grinding grain for domestic animals and birds. The raw material for grain crushers is any grain, including corn, as well as corn cobs. Completely made of high-quality domestic metal.

The hammer grain crusher includes 44 hammers, which crush the grain due to centrifugal force; there is a sieve at the bottom that regulates the grinding.
A specially shaped knife and a tube corner lid allow you to grind not only grain, but also corn cobs.
Grain crushers are supplied without an engine; the engine is connected to the grain crusher using a belt. The belt used for grain crushers is V-shaped. The grain crusher shaft rotates on a bearing.
This grain crusher will serve for a considerable time, and the belt drive and low cost of grain crushers will allow, if necessary, to easily and quickly connect a new grain crusher without having to replace the engine.

Characteristics:

Grain grinding productivity is at least 170 kg/hour;
The productivity of cob grinding is at least 50 kg/hour;
The maximum size of the crushed fraction is no more (length, width, height) diameter: 2-2-2 mm;
The set includes two sieves: 2.5 and 4.5 mm;
Pulley diameter 55 mm, Z profile;
Drive type: for electric motor;
Recommended power not less than 0.75 kW;
The recommended number of revolutions of the working shaft is at least 3000 rpm. min;
At an engine speed of 1500 rpm, a drive pulley twice as large as in the crusher is required;
At an engine speed of 3000 rpm, a drive pulley of the same diameter is required;
At an engine speed of 750 rpm, a drive pulley 4 times larger is required;
Drive shaft - on 2 bearings;
Knives: 44 hammers, steel 65 G;
Hopper capacity: 5 l;
Weight about 7 kg;
Dimensions: 420x420x400 mm